SW-28-2540-HRLE
SW-28-2540-HRLE is a seawater-family spiral-wound thin-film composite RO element. Elements in this range undergo vacuum integrity testing and carry serial numbers.
- Element size
- 63.5 × 1,016 mm
- Salt rejection
- 99.6%
- Permeate flow
- 2.574 m³/d (680 GPD)
Tested at 32,000 ppm NaCl, 25 °C (77 °F), 55.2 bar (800 psi), pH 7 (± 1.0), 8% recovery.
Lead time is confirmed with your quote and depends on order size.
- Model
- SW-28-2540-HRLE
- Segment
- Seawater
- Element size
- 2.5" × 40"
- Active area
- 2.6 m² (28 ft²)
- Feed spacer
- 28 mil
- Salt rejection
- 99.6%
- Permeate flow
- 2.574 m³/d (680 GPD)
- Test pressure
- 55.2 bar (800 psi)
- Max temperature
- 45°C
- Maximum operating pressure
- On request
- pH range (operation / cleaning)
- On request
Tested at 32,000 ppm NaCl, 25 °C (77 °F), 55.2 bar (800 psi), pH 7 (± 1.0), 8% recovery.
Cross-referenced models
Cross-references support initial selection. Confirm feed water, operating conditions and system compatibility with Hi-Tech before replacement. Published specifications may use different test conditions.
Application review required unless badged otherwise.
Frequently asked questions
What is the salt rejection of SW-28-2540-HRLE?
SW-28-2540-HRLE is listed at 99.6% salt rejection. Tested at 32,000 ppm NaCl, 25 °C (77 °F), 55.2 bar (800 psi), pH 7 (± 1.0), 8% recovery.
What element size is SW-28-2540-HRLE?
SW-28-2540-HRLE is a 2.5" × 40" spiral-wound RO element (size code 2540). Listed maximum operating temperature is 45°C.
Which models is SW-28-2540-HRLE cross-referenced with?
SW-28-2540-HRLE is cross-referenced with Toray TBW-2540HR (Application review required), Hydranautics (Nitto) SWC4-2540 (Application review required), LG Chem (NanoH2O) LG SW 2540 R (Application review required), Koch (Separation Solutions) TFC-2540-SW (Application review required), Vontron SW21-2540 (Application review required), CSM (Toray Chemical Korea) RE2540-SH (Application review required). Cross-references support initial selection. Confirm feed water, operating conditions and system compatibility with Hi-Tech before replacement. Published specifications may use different test conditions.